CT-FL is an adjustable ON-OFF capillary thermostat (Capstat) for temperature control of heat tracing circuits. Its liquid-filled sensing bulb is connected to an electrical switch by a capillary tube: as the temperature rises the liquid expands and opens the switch, and on cooling it closes again. The sensor can be fixed to the surface of a pipe or vessel, or used to sense air temperature. It is available in three ranges: 0-40, 20-110 and 20-300 °C. The sensor and capillary are stainless steel, with stainless steel armoured protection, and the cast aluminium enclosure is rated IP66. The switch is rated 16 A at 230/400 V. It is explosion-proof (Ex db), ATEX and IECEx certified for Zone 1 and 2 hazardous areas, gas groups IIA, IIB and IIC. The DUAL version adds a high-limit cut-out that trips if the process control switch fails or an unsafe temperature occurs.


